This mobile type of desorption electrolysis equipment and the gold mud smelting equipment are installed in a 40-foot container, and the customer uses it directly after switching on the water and electricity.

【HIGH TEMPERATURE AND HIGH PRESSURE TYPE】

A set of gold ore dressing equipment for extracting gold mud from gold-carrying carbon by desorption and electrowinning under high temperature and high pressure; Used in cyanidation to extract solid gold from gold-carrying carbon.

High temperature and high pressure desorption electrolysis, process model Y13-150/200/250, desorption and electrolysis temperature 150℃, pressure 0.60MPa, desorption agent sodium hydroxide, working time 8-16 hours.

Under the conditions of high temperature (150 °C) and high pressure (0.6 MPA) , the desorption rate reaches over 98%.High efficiency,low consumption,fast desorption electrolysis system(About 12hrs)

【STANDARD TEMPERATURE AND PRESSURE TYPE】

A set of gold ore dressing equipment for extracting gold mud from gold-carrying carbon by desorption and electrowinning under standard temperature and pressure; Used in cyanidation to extract solid gold from gold-carrying carbon.

Normal STANDARD temperature and pressure desorption electrolysis, process model CC13-150/200/250, desorption and electrolysis temperature 90-95℃, Normal pressure, desorption agent sodium hydroxide and sodium cyanide working time 48-72 hours.

Lower working efficiency compare high temperature and high pressure
More consumption items requirement.
About 40hrs/time desorption electrolysis system

【DESCRIPTION】

The desorption electrolysis temperature is the same, no heat exchange is needed, and the electricity consumption is 1/4 ~ 1/2 of that of the conventional system because of the fast working speed
The non-toxic desorption composite reagent contains carbon activator, which can regenerate the carbon, and the poor carbon does not need fire regeneration, thus saving the cost of carbon regeneration
NON-CYANIDE: The desorption solution does not need to add sodium cyanide, low cost, less pollution;
High grade gold mud, no reverse electrolysis, easy extraction;
Safety: With triple safety protection measures, that is, the system itself intelligent, automatic pressure limit, force release mechanism, safety valve

「MAIN EQUIPMENT LIST」

1. Absorption column	2. Electrolytic cell	3. Filter
4. Desorption liquid tank	5. Recycle pump	6. Electric heater
7. Control rectifier tank(Touch screen and PLC control.)	8. Electrically heated Ti barrels	9. Carbon emitter
10. AIR compressor	11. Clear water pump	12. Acid storage tank
13. Magnetic pump	14. Carbon storage tank	15. Acid washing agitator tank
16. High frequency smelting furnace	17. Stainless steel high temperature anticorrosive valves, instruments and pipesafter the installation and commissioning.	18. 40 foot container is used for the whole desorption electrolysis factory building.

「OTHERS SMALL ITEMS」

1. Resistance remote diaphragm pressure gauge	2. Pressure indicator regulator	3. Diaphragm pressure gauge
4. Vortex Street flowmeter	5. Flow totalizer	6. Thermal thermometer
7. Temperature sensor	8. Temperature indicator regulator	9. Diaphragm pressure gauge
10. Liquid level gauge	11. Temperature sensor	12. Temperature indicator regulator

「SOME TECHNICAL PARAMETERS」

1. Desorption solution: ph > 13.5	2. Use batch: infinite times	3. Start of electrolysis: 100-110 ° c
4. End of electrolysis: 150 ° c	5. Electrolytic current: 350-1250a	6. Electrolytic voltage: 2-4v

【WORKING PRINCIPLE】

For Analytical electrolysis system; we add easily activated carbon adsorption of anions in the desorption system, so that AU (CN)2-replacement out, the realization of the desorption of gold. The precious liquid obtained by desorbing gold-loaded carbon is recovered by ionization method, thus solid gold is obtained.

This system is mainly composed of two major parts: desorption and electrolysis. The process of desorption and electrolysis is separated so that the solvent is carried out in a comprehensive desorption tower, and the electrolysis of precious liquid is carried out in an independent electrolytic cell, the four processes of solvent desorption, heating of precious liquid, solvent condensation and solvent recovery are arranged in a comprehensive desorption tower, while the precious liquid obtained by solvent vapor desorption after carrying gold charcoal is conducted to electrolysis in a separate electrolytic cell through a pipeline, to get rough gold, and then purified to get finished gold.