The processing capacity of the jig refers to the dry ore entering the machine, that is, solid materials. Generally speaking, it can be calculated according to the processing capacity of 5 tons per hour per unit square.
In other words, the processing capacity of the 4-square jig separator in one hour is about 20 tons. The processing capacity of jigs with an area of more than 5 square meters does not increase significantly, because it only increases the length of the machine. The width does not change, so the processing capacity does not change much.
How to calculate the water consumption of jig concentrator?
Many customers can see from the user's site and video that the water volume of the jig separator is very large in the production process, resulting in the illusion that the water consumption of the jig is very large. Because the jig has requirements for water flow and water flow speed in the beneficiation process. Therefore, the make-up water at the bottom of the jig separator should indeed reach 4-5 times the treatment capacity, that is, the make-up water of a jig with a treatment capacity of 20 tons an hour should be about 800000.
The feed mixed water of the jig concentrator is not helpful to the beneficiation effect, so try to avoid too much raw water entering the jig during feeding. But the customers have an idea that the water supply is not equal to the water consumption. Although the water supply of the jig is very large, its water consumption is only a small part taken away by the sand. It accounts for less than one tenth of the total water supply, and the water after sedimentation in concentrate pond and tailings pond can be recycled. Therefore, there is no need to worry about the water consumption of the jig concentrator.
Contact:
DESEN MINERAL PROCESSING EXPERT
Whatapp:+8613319277356
Email:Desen@oremagnetic.com